Pressure Washing
Driveways, paths, patios, fences.
Commercial-grade pressure washing for hard surfaces across Melbourne. We remove oil stains, moss, lichen, algae and years of built-up grime — restoring your surface to how it looked when it was first laid.
Pressure washing is the most effective method for cleaning hard, durable surfaces like concrete, brick, pavers and natural stone. Using commercial-grade equipment running between 1,500 and 4,000 PSI — matched precisely to your surface type — we can remove staining and biological growth that household pressure washers simply can't touch.
The difference between a professional job and a DIY attempt comes down to three things: machine power, correct chemical pre-treatment, and surface knowledge. Too much pressure on the wrong surface strips the surface layer. Too little and you're just pushing dirt around. We've cleaned hundreds of Melbourne driveways and patios and we know exactly what each surface needs.
Most residential driveways take 1–3 hours depending on size and condition. Every job ends with a walk-through so you can inspect the result before we pack up.
What we work on.
How we do it.
We assess the surface type, condition, staining severity and access before confirming your fixed price. No surprises on the day.
A biodegradable degreaser or biocide is applied and left to dwell. This breaks down oil, loosens biological growth and dramatically improves the final result.
We work methodically across the surface using the correct nozzle and PSI for your material — surface washing attachments for large flat areas, lance work for edges and detail areas.
Every expansion joint, edge, step riser and corner is hand-cleaned. This is where most operators cut corners — we don't.
We do a final check of the entire area with you before packing up to confirm you're satisfied with the result.
The result.
Before & after.
Tap a card to reveal the result
Grey-black concrete driveway with oil stains and years of tyre marks
tap to flip →Clean, bright concrete with original aggregate colour restored
← tap to flipGreen-slimed paving with moss growing in every joint
tap to flip →Clean pavers with joints clear and surface non-slip
← tap to flipThe difference.
We run machines producing up to 4,000 PSI and 15–21 L/min — not the same as a hardware store hire.
Every surface gets the right pressure. Sandstone and pavers get treated differently to poured concrete.
Pre-treatment is not optional for us — it's what separates a professional clean from a rinse.
You get a fixed price before we start. If we find something unexpected, we tell you — we don't just add it to the invoice.
Common questions.
Can't find your answer? Call us — we'll give you a straight answer.
📞 Call nowGet a free quote.
Send a couple of photos and we'll send back a fixed price — same day.